Monday, June 10, 2024

How to Hang Curtains Like a Designer?

A decent set of drapes or curtains can transform a room from dull to gorgeous in the blink of an eye. However, improper hanging can prevent even the most gorgeous curtains in Dubai from enhancing a room. Before you install your window coverings, make sure you know how to hang curtains properly.

Before you begin

There are numerous ways to hang curtains and drapes, which might influence the overall appearance of your home or the mounting method. For example, hanging drapes that are taller and wider than your windows can make the space and windows appear larger. You may also need to put drapes over windows that already have blinds or utilize a method that does not involve drilling into the walls for apartment living in Dubai.

Consider how long the curtains or drapes will be below the window. Floor-length drapes give the area a formal appearance, although sill-level curtains may be more suitable for kitchens or bedrooms.

Knowing where to place the rod when hanging draperies or curtains is a challenging component. It varies depending on several aspects, including the window style, type of window covering, and ceiling height.

Consider all of these aspects while designing and installing your curtains or drapes.

Want more design inspiration? Sign up for our free daily email to get the newest decorating ideas, designer advice, and more!

Calculating height and width for hanging curtains


Use these recommendations to ensure that your rods are at the proper height:

The normal size of ordinary curtains on either side of a window is halfway between the top of the window casing and the ceiling. This applies if there are more than 12 inches between the window trim and the ceiling.
For cathedral ceilings, leave about 4 to 6 inches above the window trim as a general guideline.
Regardless of the ceiling height, the minimum space between the top of the window casing and the curtain rod is 2 inches.
Mount the drapery rods close to the ceiling to create the illusion of height. This is especially crucial to accomplish if the room has low ceilings.
Use the same guidelines for arched windows.


Use these strategies to give the curtains a regular width and create the illusion of broader windows:

On either side of the window, the normal distance between the window casing and the end of the curtain rod (excluding finials) is 4 to 10 inches.

Typically, people leave their drapes open during the day, so ensure that the curtain rod extends at least four inches on either side of the window’s inside frame.

Extend the rod up to 10 inches beyond the window frame to create the illusion of a larger window.

Curtain Sizes:

Consider the appropriate size, length, and breadth of curtains for your room. There are numerous store-bought possibilities, but your room may want custom-made curtains for unique heights, room dimensions, or window placement.

Generally, the optimal curtain length is long enough to touch the floor.
Consider curtains that puddle a couple of inches on the floor for a more conventional, formal appearance.

Do not hang your curtains over the floor. When they end a few inches above the floor, the ceilings may appear lower.

To make curtains appear full, the panels should be at least double the width of the window. If you have two panels, each should be the same width as the window.

Some textiles hang differently than others; light fabrics may require more fullness, while heavy materials may demand slightly less.

Curtain Hardware

Curtain hardware is often the final step in bringing the area together and allowing you to complement the room’s d├ęcor.

Curtain rods and finials should match the curtain fabric. Consider using heavier fabrics, such as velvets and chenilles, on large, ornamental rods, whereas light cotton and sheer textiles may work better on lightweight, daintier rods.
The hardware should also complement the decor. If you use Lucite or oil-rubbed bronze elsewhere in the space, be sure it matches your hardware section.
Consider matching the finals at each end of the curtain rod to the room’s design.

How to Hang Curtains

Take measurements.

Take careful measurements of your windows’ width, height, and location between the ceiling and the floor. Use these measurements to choose the right rods, brackets, and curtains or drapes.

Determine whether and how far the blinds stand out from the window casings before hanging the drapes over them. This will establish the necessary offset of the brackets and rods from the wall.
Take window measurements before hanging curtains or drapes.

Determine the size and style variables to consider

How formal is your style?
What is your room’s aesthetic?
Would you like the cloth to be sheer to let in more light? Do you prefer light-blocking or blackout curtains?
Are you purchasing longer drapes to give the room more dimension?
If the curtains are custom-made, consider the time it takes to order and get them. This can take several weeks.
Determine the size, style, and material of curtains or drapes.
Choose rods and hardware.
Choose hardware based on your window measurements and preferred style. Hardware can range from basic thin rods supported by practically undetectable brackets fastened to the window frame to intricate ornament rods and brackets with ornamental finials gracing the rod ends.

Install brackets

The first step in installing your window treatments is to take precise measurements and attach the rod brackets to the window frame or wall.

Drill pilot holes or use wall anchors to support heavier curtains.
Attach brackets directly to wall studs (using a stud finder tool), or use toggle bolts to securely fasten rods to the wall in the spaces between studs.
Install the brackets so that they are level from side to side and at the appropriate height above the floor.

Mount curtains on rods.

Insert the rod through the curtain header pocket or eyelet; alternatively, certain styles may require you to attach drapery hooks via pleats at the top of the curtains.

Hang Curtains

Attach the curtains to the rod or hanging hooks to hoist them into place. This normally necessitates the use of a helper and one or two stepladders.

Install tiebacks (optional).

Tieback cords and hardware may be necessary if you have formal-style curtains or a specific design approach.